Can PTFE plates be sandwiched and used with nylon plates?

- Jun 19, 2019-

Plates made of PTFE can be called PTFE plates, and they need to have some understanding and understanding, because they can use this product correctly and reasonably, and achieve the purpose of use. Make full use of products and avoid problems such as product waste.


1. When purchasing a PTFE board, what are the necessary conditions for choosing a good quality product?

PTFE board for product selection, if you want to choose a good quality product, one of the necessary conditions is to choose a professional PTFE board manufacturer, so as to ensure product quality and product performance, and, in turn, to ensure products The effect of using. Based on this, it can be concluded that if you want to choose a good quality PTFE plate, the manufacturer of the product must consider these aspects, not the price of the product.


2. Can the PTFE plate have a sandwich?

The PTFE plate, which may also be called a Teflon plate, may be sandwiched, for example, one to a plurality of steel plate interlayers may be used to ensure sufficient hardness of the PTFE plate. Moreover, the PTFE material has a small sliding friction coefficient and good wear resistance, and therefore, such a PTFE plate can be used in construction, such as a bridge plate sliding bearing and a large structure pushing slide.


3. Why can PTFE plates be used in some corrosive places?

The PTFE plate can be used in some corrosive places because the main component of the material on the material is polytetrafluoroethylene resin. This resin is almost free of any chemical reagents except the molten alkali metal. Corrosion, can withstand the corrosion of concentrated sulfuric acid, nitric acid and hydrochloric acid, and is almost insoluble in any solvent, so this conclusion and this specific application will be available.


4. Is nylon plate and PTFE plate common?

Nylon board, which is made of nylon, is a general term for polyamide series polymer materials. Common nylon materials are nylon 6, nylon 66, nylon 1010 and nylon 610. This material is characterized by high mechanical strength. The PTFE plate is made of a PTFE material such as polytetrafluoroethylene, which is one of plastics. Therefore, the two plates are made of different materials, the products have different properties, and the products are not