Comparison of PTFE Pall Ring with other rings and how to choose the right manufacturer
PTFE Pall ring, which is a specific type of Pall ring, and is a common and commonly used type of Pall ring. Therefore, it is necessary to fully understand and understand the product to use the product correctly and reasonably, and to make the product available through proper use. Good use effect, in turn, to achieve full utilization of the PTFE ball ring and achieve the purpose of use.
1. When purchasing the PTFE Bauer ring, is there any consideration for the relevant factors?
From the professional point of view, this is an important task, and it should not be underestimated and sloppy. And, it has related considerations, such as product origin, parameters, quality, price and manufacturer. Moreover, all the factors related to product purchase are important considerations, and there is no importance in importance. Therefore, these factors must be considered and should not be underestimated and sloppy.
2. How should the PTFE Bauer manufacturing manufacturer choose the right one?
If you want to have the right choice in the manufacturer of the PTFE Bauer ring, it is important to choose a professional and regular manufacturer, and you cannot purchase and use products without quality assurance. Choosing professional and regular manufacturers can ensure that the products have good quality and good performance of the products, and in turn, to ensure that the products have good use.
3. Is there a big difference between the tetrafluoropal ring and the ordinary Pall ring?
Ordinary Bauer ring, from a professional point of view, is made on the basis of the Laxi ring on the wall of a window or two, and the arrangement of these windows has a certain order and regularity, not casually open . Based on this, the flux and mass transfer efficiency of the Pall ring is better than the Lacy ring. The PTFE Pall ring is a Pall ring made of PTFE. It is a specific type of Pall ring. Therefore, it has some differences compared with the ordinary Pall ring, but it is not There is a big difference.
4. Is the step ring a PTFE Pall ring?
a step ring, which is a specific type of ring, has a height-to-diameter ratio of only half of the Pall ring, and has a tapered flange at one end of the ring to reduce the resistance of the gas passing through the bed and increase the flux. It is also possible to enhance the strength of the filler. Therefore, from the above description of the step ring, it can be concluded that the step ring is not a Pall ring nor a tetrafluoropal ring.www.yihaoptfe.com