The Bauer ring, if it is made of PTFE material, is a PTFE pall ring. It is known by name that this kind of Pall ring is made of PTFE and it belongs to Plastic fillers can be used in the chemical industry. Therefore, it is necessary to familiarize and understand, so that the correct and rational use and full utilization of the product can be realized.
1. PTFE pall ring product purchase route
PTFE Pall ring, the way to purchase products from the current point of view, it can be said that there are different ways, according to their own conditions and actual conditions to choose the appropriate way, in order to choose the right product. In the specific purchase route of the product, there are three ways to purchase. One is to find the manufacturer to directly purchase, the other is to purchase through the agent, and the third is to purchase the product on the industry website. However, you need to know that no matter which way you choose, you need to know the specific information of the product and the manufacturer to make an accurate judgment.
2. Is there any benefit in using the PTFE Pall ring in the chemical industry?
A PTFE pall ring, which is a tetrafluorofiller, or a PTFE filler, can be used in chemical products, can be used as a solid material filler, and can reduce costs. In addition, by using this kind of Pall ring, it is also possible to increase the contact surface of the gas and the liquid so that the two media can be strongly mixed with each other to obtain a good mixing effect. Therefore, the conclusion drawn from the above description is that the chemical industry has certain advantages and advantages in using the PTFE Pall ring.
3. Is the opening area of the PTFE Pall ring large?
PTFE pall ring, which is a kind of filler, and is an open-cell annular packing with the same height and high diameter. Each window has five tongues, each of which is bent to the center of the ring, and the upper and lower windows are The position of the holes is staggered in the opposite direction. In addition, the opening area accounts for about 30% of the total area of the ring wall. Therefore, from this point of view, the opening area of the PTFE pall ring is not very large, but it is not very small and cannot be ignored.
4. Is the metal and PTFE Pall ring the same in the production process? Is there a difference between the ceramic Pall ring and the PTFE Pall ring?
Metal and PTFE Pall ring in the production process, from a professional point of view is a different process, because the production process of metal Pall ring is stamping or punching, PTFE ball ring is extrusion molding, so it can be said that The production process of these two Pall rings is different. The comparison between the ceramic Pall ring and the PTFE Pall ring is obvious. It is mainly in the three aspects of material, performance and use. The former is made of ceramic material and the latter is made of plastic material.www.yihaoptfe.com