Notes on different types of PTFE rods and whether there are temperature requirements for use
For the product of PTFE, everyone needs to have a comprehensive understanding and in-depth understanding, because it is very widely used in the current use, and it can have good use effect as long as it is correctly and reasonably used. Based on this, the following is the explanation of the knowledge related to PTFE rods. The explanations are as follows.
1. When purchasing a PTFE rod, should all relevant factors be considered?
For the purchase of products, it is necessary to pay attention to and take this work seriously, and it should not be underestimated and sloppy, because if the wrong choice occurs, it will affect the use of the product and at the same time, cause waste of the product and bring certain Economic losses. In consideration, all relevant factors should be taken into consideration, and these factors are all important considerations because they are related to product purchase. They need to be considered and should not be underestimated.
2. Does the different types of PTFE rods correspond to different processing technologies?
Tetrafluorocarbon rods are available in different types, such as PTFE rods, extruded PTFE rods, and molded PTFE rods. The three PTFE rods have different specific names because they correspond to different processing techniques. Moreover, we also need to know that different types of PTFE rods correspond to different diameters, the diameter of the PTFE rod is 4-9mm, the diameter of the extruded PTFE rod is 10-50mm, and the diameter of the molded PTFE rod is 55-300mm.
3. Is there a temperature requirement during the use of the PTFE rod?
The PTFE rod is a temperature requirement in the use of the rod. From a professional point of view, for safety reasons, the temperature is not required to exceed 260 degrees. Moreover, what everyone needs to know is that the material of PTFE used in the PTFE rod has a melting point of 327 degrees.
4. Can nylon rods be used as PTFE rods? What should you pay attention to during the use of PTFE rods?
Nylon rods, which cannot be used as PTFE rods, as these are two different bars. Moreover, they are different in appearance color, one is pure white and the other is beige. During the use of PTFE rods, cracks or cracks should be avoided, because if these problems occur, it will affect the normal use of PTFE rods and their use, so they should not be underestimated.www.yihaoptfe.com