Polytetrafluoroethylene Lining type and process and its quality compliance requirements

- Jan 16, 2019-

Polytetrafluoroethylene Lining, which is a kind of pipe, which also uses PTFE material in the material. Therefore, it also has some relationship with the PTFE tube. In order to comprehensively and deeply understand the PTFE tube, it is necessary to The pipes are familiar and understandable, so that they can achieve their goals and broaden their knowledge.

 

1. Are there important considerations when purchasing Polytetrafluoroethylene Linings?

Polytetrafluoroethylene Linings need to take into account all relevant factors when purchasing products, so that they can have accurate judgments and correct choices, and they are important considerations. However, it should be noted that as long as it is related to product purchase, it is an important consideration and cannot be considered as some of them. In addition, there are factors that must be considered, such as the origin of the product, parameters, quality, price and manufacturer, and can not miss any of them.

 

2. How does the Polytetrafluoroethylene Lining meet the anti-corrosion requirements? What are the linings?

Polytetrafluoroethylene Lining wants to meet the anti-corrosion requirements. Considering that the pipe melt flowability is not very good, the coating must reach a certain thickness before the anti-corrosion requirement can be achieved.

 

The lining of the Polytetrafluoroethylene Lining has two kinds of loose lining and tight lining, and their processes are different, respectively:

Loose lining: Simplified cleaning → sheet selection → welding → lining → flanging → inspection.

Tight lining: Simplified cleaning → curing by water heating adhesive → plate selection → plate surface activation treatment → welding → simplified adhesive lining → flanging → detection.

 

3. What are the factors affecting the service life of Polytetrafluoroethylene Linings? What are the requirements for quality?

The service life of the Polytetrafluoroethylene Lining is three parameters of the pipe temperature, pressure and medium from the professional point of view, and these three parameters will affect the stability of the pipe performance.

 

Polytetrafluoroethylene Lining, if it wants the quality to meet the standard, it must have good acid and alkali resistance and strong oxidizing agent corrosion resistance of PTFE pipe, and it should have the strength of steel pipe or steel structure. Together with the above, it can be used normally and smoothly, and the product has good performance and use effect, and further, the product can be fully utilized.www.yihaoptfe.com