PTFE plate rubber bearing understanding and stair-specific PTFE plate installation instructions

- Jan 08, 2019-

Tetrafluoride board, which is widely used in some industries, so it is necessary to have a comprehensive understanding to know how to properly and properly use the PTFE board and make full use of it, so that the product can be used well. Achieve the purpose of use without adverse effects due to wrong use.


1. Does the price of PTFE plates need to be valued?

The product price of PTFE board is a very important aspect from a professional point of view, and it is an aspect that must be considered in the purchase process of this product. Based on this, it is necessary to pay attention to the price of PTFE plates. Specifically, when purchasing, you must first determine the appropriate price range or price range, and then choose the right product in it to avoid the wrong choice, which in turn affects the normal use of the product.


2. What is a PTFE rubber bearing?

PTFE rubber bearing, which is a fitting that can be used together with PTFE plate. Compared with ordinary plate rubber bearing, it has some advantages in use, specifically: in addition to ordinary plate rubber In addition to the vertical stiffness and elastic deformation of the seat, it can also withstand vertical loads and adapt to beam end rotation. In addition, by using a low coefficient of friction between the PTFE plate and the stainless steel plate, the horizontal displacement of the upper structure of the bridge can be made unrestricted. This kind of support has the characteristics of simple structure, low cost and no need for maintenance, and can play the role of buffering and isolating.


3. Why use and installation of special PTFE plates for stairs

Why use the PTFE plate for stairs? Professionally, it is designed and manufactured for seismic shock absorption requirements in order to improve the safety of the building. Moreover, the material of PTFE is resistant to aging and corrosion, and has certain elasticity, and is particularly suitable for the buffering requirement in cement steel structures.


A special PTFE plate for stairs, which should be cut by a cutting machine during the cutting operation. After the installation is completed, the parts that are easily contaminated should be protected. The plastic film can be used for cover protection, and the parts that are easily scratched should be protected by safety barriers. In this way, it is ensured that the PTFE plate can be used normally and has a good use