Should the purchase of polytetrafluoroethylene tubing be cautious and should the tubing be lubricated?

- Apr 15, 2019-

1. Is there a need for comparison of factors related to the purchase of polytetrafluoroethylene tubing? Should you choose to be cautious?

When purchasing polytetrafluoroethylene tubing, it is necessary to take all relevant factors into consideration, and to consider these factors in order to make yourself accurate and correct. These factors, because they are all related to product purchases, are important considerations and need to be considered. Therefore, based on this drink, one can conclude that there is no need to compare the factors related to the purchase of polytetrafluoroethylene tubing. Moreover, this comparison has no practical significance and does not require this work. In addition, the purchase of this product should be cautious to avoid the adverse effects caused by wrong choices.

2. In which use of polytetrafluoroethylene tubing, other tubing cannot be replaced?

Polytetrafluoroethylene tubing, the material of which is made of PTFE. From a professional point of view, this is a better material with good corrosion resistance. Therefore, this kind of pipe can be used. To transport strong corrosive gases or liquids at high temperatures, this is not possible with other pipes, and other pipes can not be replaced.

3. Does the polytetrafluoroethylene tubing need to be lubricated?

Polytetrafluoroethylene tubing, which is a specific type of tubing, and is made of polytetrafluoroethylene. This material is almost insoluble in all organic solvents because it is resistant to acids and bases and to various organic solvents. Self-lubricating and easy to clean, so the answer to this question is that it does not require lubrication for polytetrafluoroethylene tubing.

4. What is the polymerization in polytetrafluoroethylene? Will it affect the quality of polytetrafluoroethylene tubing?

Polytetrafluoroethylene, which is formed by radical polymerization of tetrafluoroethylene, requires polymerization to obtain a material of polytetrafluoroethylene. Industrially, the polymerization is carried out in the presence of a large amount of water, which acts to disperse the heat of reaction and control the temperature. Generally, the polymerization temperature is from 40 ° C to 80 ° C, and some initiators may be used to promote the reaction process. Whether it will affect the quality of polytetrafluoroethylene tubing will be affected from a professional point of view, but it is for indirect impact rather than direct