Whether the diameter of polytetrafluoroethylene tubing can be large and compared with packing

- Apr 30, 2019-

Polytetrafluoroethylene tubing, this is a specific type of tubing, and it is also a product that we all need to know and understand, because only in this way, we can let everyone know what it is and how to use it properly and achieve its purpose. Make full use of this product.

 

1. What are the requirements for the consideration of polytetrafluoroethylene tubing products?

The purchase of polytetrafluoroethylene tubing products is an important task from a professional point of view. It needs to be taken seriously and carried out. Therefore, it cannot be ignored and sloppy, and its considerations in consideration of factors are specifically : To know what is an important consideration and what are the necessary considerations, and to consider all relevant factors comprehensively and comprehensively, in order to select the right product.

 

2. What is the specific resistance to atmospheric aging of polytetrafluoroethylene tubing? Is it acidic or alkaline?

The weathering resistance of polytetrafluoroethylene tubing refers to radiation that is resistant to ultraviolet rays of sunlight and the like, and has low permeability. Even if exposed to the atmosphere for a long time, the surface properties of the pipes can remain unchanged and will not follow. Time increases and decreases. This type of pipe, which is neutral in acidity and alkalinity, is neither acidic nor alkaline.

 

3. Is the PTFE braided packing a polytetrafluoroethylene tubing?

PTFE braided packing, which is a good dynamic sealing material, is woven from expanded polytetrafluoroethylene strips and has a low coefficient of friction. In addition, it has good abrasion resistance, chemical resistance and sealing properties, and does not hydrolyze and harden. From the definition and description of the PTFE braided packing, it is not a polytetrafluoroethylene tubing, and it is different from the polytetrafluoroethylene tubing.

 

4. Can the diameter of the polytetrafluoroethylene tubing be large? Is its wear resistance the strength of the pipe?

The diameter of the polytetrafluoroethylene tubing can be very large from the current point of view, and can be made to be 1.8 meters in diameter and used as a seal. However, in the specific pipe diameter, it should be determined by the specific use and use requirements. If it is used to transport fluid, the pipe diameter is generally not large. The wear resistance of the Teflon pipe is not the forcing of the pipe, because the light is better than the PTFE material from the viewpoint of wear resistance.www.yihaoptfe.com