Whether the PTFE rod purchase factor needs to be compared and withstand the temperature determinants

- Apr 09, 2019-

1. Is there a need to compare the relevant factors when purchasing PTFE rods?

For the purchase of PTFE rods, it is necessary to pay attention to this work and take it seriously, because if there is a wrong choice, it will have adverse effects. The factors related to product purchase are important considerations, and all need to be considered. Therefore, they are the same in importance, and there is no distinction between them. Therefore, it can be concluded that there is no need to compare the factors related to the purchase of PTFE rods, and there is no meaning or value in this comparison.

2. Is there a difference between ordinary PTFE rods and elastic PTFE rods?

From a professional point of view, there are some differences between ordinary PTFE rods and elastic PTFE rods, mainly in material density, material composition and specific use. The density of ordinary PTFE rods is greater than that of elastic PTFE rods, which are used for different purposes. However, because they belong to the PTFE rod, there are some similarities, which are good corrosion resistance.

3. How many degrees of high temperature can the PTFE rod withstand? What determines?

How many degrees of high temperature can the PTFE rod withstand? From a professional point of view, it is determined by the application industry and the use environment. If it is the valve industry, it can withstand 150 degrees of high temperature. If it is the insulation industry, it can withstand 280 degrees of high temperature. . However, it is necessary to look at chemicals and pressures, which may have some impact.

4. Is the PTFE rod available in a variety of corrosive media?

The PTFE rod, in terms of its properties, can be used in various corrosive media because of its good corrosion resistance and good insulation properties. However, it should be noted that for most corrosive media, PTFE rods can be used normally, but for individual corrosive media, it is possible that PTFE rods are not suitable. In this case, other suitable materials should be selected to meet the requirements.www.yihaoptfe.com