Overview
First, the metal bellows expansion joint uses PTFE powder to press it into the pipe, chemically treat the surface, and then line it into a seamless steel pipe.
1.5-2mm) to form a seamless lining. In order to reduce the pressure, it needs to be placed in a furnace and heated to 180 degrees to maintain a constant high temperature treatment so that it can be used at temperatures below 180 degrees. At the same time, the strength of the axially stretched and extruded (extruded) pipe is significantly better than that of the wound pipe, and can be used for slight negative pressure pipes.
Features and advantage
1. Lining material: PTFE, PFA, FEP, PVDF, PO, PP, PE
2. Under 1.5 times of the design pressure, the pipes and pipe fittings are tested for hydraulic pressure
3. In the case of PTFE lining, a 100% integrity test is performed after the hydrostatic pressure test, and the test method for the leakage point is the electric spark test.
design standards
Medium: It can transport any concentration of strong alkali, strong oxidant, organic solvent, strong acid and toxic, volatile and flammable chemical medium.
Diameter: DN25~DN300
Connection method: flange
Length: ≤4000mm
About Us
For nearly 20 years, Jiangsu Yihao Fluorine Plastic Manufacturing Co.,Ltd. has been the China's leading supplier of PTFE piping systems. We offer ptfe pipes, sheets, rods, gasket sheets, pall rings, ladder rings, rasching rings, eye rings . As we look forward we have expanded our range to include PTFE lined Stainless Steel, Carbon Steel pipes and fittings, elbows, tees, Cross, Valves, ptfe hose together with a comprehensive selection of installation tools and fixings. We provide levels of service which are un-matched in our industry, backed by a quality system accredited to ISO 9001 - 2015.
